ER316L Stainless Steel Gas Shielded Arc Welding Wire

Introduction:

The main component of JQ.H0Cr19Ni12Mo2 is 18Cr-12Ni-2Mo; it is Stainless steel MIG welding wire. It is all position welding. The weld-ability is good. Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. It has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt corrosion because it contains Molybdenum.

Confirm to standard:

AWS 5.9
ASME SFA 5.9
AWS ER 316/ ER 316L
UNS S31683

Purpose:

It is widely used in petrochemical, chemical fertilizer equipment such as 022Cr17Ni12Mo2 (SUS 316L) and other materials of welding.

Chemical Composition(%)

Reference Current (DC⁺)

Notes:

1. Shield gas: Must ensure not to operate with impurity shield Gas.
Recommendation Rate of mixed gas: Ar+1-3%O2.
2. Operation flow rate of shield gas: 20-25L/min.
3. Electrode extension: 15-25mm
4. The welding should be operated in clean surface without rust, moist, oil contamination and dust.
5. Prevent affected of wind when wind speed reach 1.5m/s to avoid bubbles generated.

The above suggestions are for reference purpose. Evaluate and determine the situation of the scene before starting the wielding process.

Longteng Special Steel Group is a well-known private enterprise in China's special steel industry. Founded in 1993, it is a deep processing enterprise of metal products integrating sintering, ironmaking, steelmaking, refining, continuous casting, rolling and metal product processing. It has an annual output of 4.5 million tons of various special steels and its products are sold to more than 40 countries and regions. Longteng Special Steel Group has ten major business segments. Its leading products include: hot-rolled Marine sections, prestressed concrete (PC) steel bars, high-end wear-resistant steel balls, high-end welding materials, oil and gas pipe fittings, new energy forgings, medium and heavy plates, etc.
Among them, the three major products of Marine steel sections, PC steel bars and wear-resistant steel balls have all become the largest production bases in China, with market shares of over 60% in the domestic niche industries. Among them, wear-resistant steel balls have become the second largest supplier in the world's grinding industry

Vice President Company of CANSI

(China Association of National Shipbuilding Industry)

Six main products series ( 5.0 million tons)
1. Welding Materials
2. Shipbuilding section
3. High-strength pre-stressed concrete steel bar
4. Forging ingot series
5. Steel ball series for bearing & mining industry
6. Flange & End Plate

7: Steel thick plate

As part of our development strategy, we have always been focused on the complete production process model. We believe this will bring us synergy effects. Therefore, recently, a new product, namely welding consumables, has been added to our catalogue. It will cover all series such as gas shielded solid welding wires, flux-cored welding wires, submerged arc wires, argon arc wires, etc., as well as medium and heavy plate series (thickness 6-800mm). Width: 1500mm-3650mm, maximum single weight: 60t

Our LT welding wire has two main advantages:
A fully integrated production process, that is, supported by the world-class upstream steel manufacturing facilities of the same group company.
The newly developed production process, which adopts the latest technologies and know-how, namely fully automatic production, will ensure quality control.
Our advantages of medium and heavy plates:
Complete electric furnaces and off-furnace refining equipment
The rated capacity of the ultra-high power electric furnace is 115 tons, and the maximum steel output per furnace is 130 tons
It has two 115-ton LF refining furnaces and one double-station VD furnace
The largest-sized steel ingots and continuous casting billets
The largest flat steel ingot is 60 tons, and the largest plum blossom steel ingot is 270 tons
The maximum single weight of the ingot steel plate: 60 tons (forged and rolled combined process)
Continuous casting adopts the techniques of dynamic light pressing, dynamic secondary cooling and heavy pressing
The maximum cross-sectional specification of the continuous casting billet is 460*2600*3600mm
Complete rolling line equipment
Advanced split vertical rolling mill